I needed a new server case due to Antec P180 case becoming much to cramped. After reading many positive forums posts about the Cooler Master Stacker cases, I made my purchase. Here are my thoughts.

To be clear, this is the older Stacker 810 case, not the newer Stacker 830 Evolution. I think the 810 offers many for features for a much lower price; I’m not sure why the 830 is even around.

Th Stacker 810 is a great case if you have a bunch of drives and need a large, well cooled case. If you purchase 2 additional 4-in-3 modules, this case has 14 5.25″ drive bays, so it can handle 12 hard drives plus a DVD and a floppy drive. It is extremely large inside and can easily handle pretty much any motherbaord, plus there is a removable motherboard tray. There is a 120mm fan on the top as well as one on the front of each drive bay and the case has provision for two power supplies (one above and one below the motherboard tray.)

My DVD drive was very easy to install in the case, just place a plastic guide rail on the side and slide it into the locking drive bay.

The 4-in-3 drive bay (which fits four 3.5″ hard drives in three 5.25″ bays and includes a 120mm cooling fan) was not so easy. The drives are secured using screws, but there are 2 panels and 4 rails that must be held in place before sliding it into the front of the case. And if you take it out, it completely fall apart. I would prefer these snap together somehow, but I guess I won’t be removing the drives all that often.

If you really want to stretch the capacity of the case, you can use three SuperMicro CSE-M35T-1B 5-in-3 hot-swap SATA enclosures and fit 15 hard drives plus two more 5.25″ drives. Personally, I think spending more on drive enclosures than you do on a case is a waste of money. I seen no need to hot-swap drives in a home server, but it is an option if you need the space and can tolerate the loud, high-pitched fan of these SuperMicro enclosures.

This case is designed for a bunch of airflow. The downside of this is that it creates more noise as compared to my almost-completely-sealed-and-silent Antec P180 case. The perforated covers on front of each of the Stacker 810 drive bays are great for airflow, not so great for sound blocking. Luckily, due to the large 120mm fans and super-quiet Samsung drives, the noise is a soft, background noise rather than a higher-pitched, shrill, annoying noise. But hey, this is a server case, and servers should be hidden away in a back room, and not in your living room or home theater. Cooling trumps noise for a server case, and this one has great cooling. I monitored my hard drive temps, and all were at or below 26-degrees C.

Conclusion

Pros:  This is a great case because it is very simple to work with, supports multiple motherboard sizes, has great cooling, and has a large number of drive bays. For the price, it is a very well-made server case.

Cons:  The disadvantages are that it is not super-quiet and it takes up quite a bit of space (more than it really needs to due to so much unused space inside.) Unfortunately, it does not come with a power supply and it only includes one 4-in-3 hard drive module.

Extra Info: Part Number Detail

Unfortunately, there are a bunch of different Stacker 810 cases and the differences are not clear. After some research, I figured out which is which. Here are the details and the part numbers:

• STC-T01-UW – Silver; Dual Power Supply Locations (top & bottom); ATX, mATX, BTX, mBTX motherboards
• STC-T01-UWK – Black; Dual Power Supply Locations (top & bottom; ATX, mATX, BTX, mBTX motherboards
• RC-810-SSN1 – Silver; Single Power Supply Location (bottom); ATX, mATX motherboards
• RC-810-SKN1 – Black; Single Power Supply Location (bottom); ATX, mATX motherboards

If you are looking for accessories, here are some part numbers:

• STB-3T4-E1-GP – 4-in-3 drive bay adapter with fan (case comes with 1 of these)
• RC-880-FKR1 – 3.5″ drive bay cover (case comes with 1 of these)
• SPB-S01-E1 – PlexiGlass side window – Silver
• STF-B01-E1-GP – Cross-flow fan