483 Comments

  1. there is an information in the usb but now it need to be formatted so I think the usb is damaged and to access that information or fix the usb if possible.

  2. Hi! I own a very old Western Digital 640 Gb SATA/8MB cache WD6400AAVS -00G9B1 – WD Caviar Green. unintentionally I used the wrong power adapter and I believe I burnt the PCB. Before this mishap the external HD was working perfectly fine. I am trying to buy a HD docking station to retrieve the info. I purchased the iDsonix super speed USB 3.0 (iDD-U3102) and it wouldn’t recognize the external drive. Would you please recommend a Hard Drive docking station compatible with the specific external HD mentioned above. Thank you in advance for any help you can give. Be well 🙂

  3. Hi. Just followed your instructions on this and I’ve got my “dead” WD 1TB running in a Next Star Hard Drive Dock. THANK YOU for your guidance on this.

  4. on several of the larger NAS or even external desktop drives I have been unable to get any system to recognize the drives once removed from the NAS or USB controller board. These are all larger 3 or 4 TB drives. I had read somewhere that the drives are formatted such as they can only be “seen” when connected to the correct controller. For my correct needs, i would much rather just mount them inside the system case and they do have the standard SATA connectors. Any idea what I am doing wrong?

    1. Author

      questorfla: You’ll need the exact same controller to be able recover the data from the drive. It’s encrypted by the controller.

  5. My book essential extra drive problems with power button

  6. Where do I register to watch the video?

      1. Hi Carlton,

        I have stumbled upon this guide and first of all thanks for taking time to describe the issues and fixes. I have a MyBook Essential 2TB drive – hdd seams fine, just not mounting. I understand this is a problem with the encryption, however my board (external case – not PCB) looks like it is burned and I am unable to recover it. Do you think that if I buy another MyBook Essential drive with different parameters (ie. 1TB instead of 2TB) – take it apart and use the USB board? Would the encryption key be stored on my drive and work with other USB boards?

        So far I have used a third party to replace my PCB board (and transfer bios) but it looks like this might have not been the issue. So now I am looking at this burned USB/Power/Board knowing I can’t clean it as it must have effected a lot of components or the whole circuit.

        Any further explanation or information on this that you might have and could help me, would be grately appriciated. I am unable to afford proper data recovery as it costs too much for me to handle. Data on my drive is uber important for me as it includes photos/videos of my newborn child and it would be a great shame to loose it all (+last 10 years of digital photos and other data).

        Kind Regards,

        Mike, PL Gdansk

        1. Author

          Mike, your best bet is to get a working version of the exact same model, from ebay or elsewhere, and put your drive in that enclosure. Some WD will be the same as yours, but others will be different. I don’t know the details of each model. Your other option is to send the drive to a data recovery service. Good luck!

  7. Hi
    I would like change inner disk in my WD My Book Studio WDBC3G0020HAL.
    When I opened my WDBC3G0020HAL, I discovered WD20EARX Green’s series.

    Can I upgrade inner disk with WD Green WD40EZRX or WD50EZRX, WD60EZRX?

    Kind Regards,
    Dmitriy, Ukraine, Dnipro

    1. Author

      You might be able to do that upgrade. It’s hard to say. It’s hit or miss with WD compatibility. You can give it a try, but you’re probably better off just getting a new external enclosure and drive. Or find a third-party enclosure and add whatever drive you want.

  8. Hi, thanks for your guide. I’m looking to swap my My Book Studio drive with Seagate, but seems like i can’t find the prongs and jumpers mentioned above.. i can see others J1-J17 but not J6
    Not sure if you (or Fisslefink) have this documented, a picture references maybe?

    My board is 4060-705083-003.REV. A

    Appreciate any advices.

    Cheers!

    1. Author

      That newer version may not have a jumper. I didn’t find that it was essential to use it in older versions.

  9. Hi, My Book Studio (White Case with display). Changed damaged WD Green 1 Tb with WD Red 2 Tb, all worked fine!!!! Need format before 🙂

Leave a Reply to Jorge García Cancel reply