View source

From DVRpedia

You do not have permission to edit this page, for the following reasons:

• The action you have requested is limited to users in one of the groups: Administrators, Bureaucrats.
• You must confirm your e-mail address before editing pages. Please set and validate your e-mail address through your user preferences.

You can view and copy the source of this page:

This shows a failure of the solder joint for the original HDMI board in the HR10-250 which was soldered / glued to the mainboard. Newer versions of the board use a different / improved connector.

Return to File:Hr10-250 hdmi board failed solder joint.jpg.